How To Repair Broken Curb At End Of Driveway

Repair Broken Curbs

Concrete Curb REPAIR WITH FUSION-CRETE

Broken curb prepped and ready for Fusion-Crete repair
by ane worker in an hr with $7 of modified mortar

Fresh curb repair with Fusion-Crete. When dry out, the
restoration volition closely match the original concrete.

It happens every winter – curbs crumble, knocked by plows during snowfall removal. And so what's the best way to repair broken curbs? Try Fusion-Crete – our formless curb repair technique costs one-half every bit much every bit traditional curb removal and replacement. Check out these use cases beneath – the proof is in the pictures!

Problem: Snow removal equipment damaged this adjourn (above left).

Solution: The municipality opted to use the Fusion-Crete curb repair technique to repair the broken curb considering tear-out and replacement was too expensive and disruptive.

Benefits of using Fusion-Crete to repair broken curbs:

• The Fusion-Crete curb repair took only one hour & 1 worker to consummate
• The repair technique required the use of hand tools only - no forms needed
• Labor and materials for this Fusion-Crete formless adjourn repair cost half as much equally traditional tear-out and replacement would have price
• The cost of the Fusion-Crete repair mortar materials used in the repair totaled nigh $7

Results: The municipality was pleased with the results of this quick, cost-effective prepare.

See how: Repair Broken Curbs with Fusion-Crete Formless Curb Repair

Another EXAMPLE OF CONCRETE Adjourn REPAIR & FUSION-CRETE DURABILITY

20 feet of this damaged curb in a downtown
ski surface area fell apart when prepped in 2022

Restoration of demolished curb section
after Fusion-Crete repair (summertime 2022)

Same curb attractively repaired, painted and
completely intact in April 2022 afterwards two winters

Repair Broken Curbs Busted by Snow-Removal Equipment

Problem: A 20-foot section of curb head was destroyed by fixed-bract snow removal equipment (to a higher place left) on Lincoln Avenue in downtown Steamboat Springs, Colorado.

• Steamboat is a mountain town receiving upwards to 400 inches of snowfall per year. Constant snowfall removal inadvertently causes astringent damage to concrete curbs in winter. The city pays for curb repair annually to keep upwardly the appearance of Lincoln Avenue.
• The curbs in downtown Steamboat are cast in one piece with about eight anxiety of concrete road surface, which is 12 inches thick. This makes constant removal and replacement price-prohibitive.
• Removing damaged concrete takes heavy equipment. Replacing physical takes concrete trucks. Bringing in heavy equipment and concrete trucks ways endmost travel lanes, which results in traffic delays.

Solution: Steamboat Springs opted to use Fusion-Crete to set up broken curbs over removal and replacement to save time and money and avoid the demand to close roadways.

Benefits of Using Fusion-Crete to Repair Broken Curbs:

• Cleaved curb repairs can be achieved quickly and economically with no need for traffic control
• No forms or heavy equipment needed
• Fusion-Crete formless adjourn repair costs nearly one-half as much every bit curb removal and replacement

Results: The City of Steamboat Springs is incredibly pleased with the curb repairs and has used Fusion-Crete annually for physical adjourn repair and renovation for six years running!

Source: https://www.fusion-crete.us/repair-broken-curbs/

Posted by: wyantforray.blogspot.com

Share this post